LIMING HEAVY INDUSTRY

company profile

MB5X158 Pendulum Suspension Grinding Mill

Type:Mineral Ore Powder Making
Input Size: 0.045-0.18mm
Processed Materials:
Feldspar, calcite, limestone, talc, barite, rare earth, marble, bauxite, phosphate ore, iron oxide red, dolomite, granite, bitumite, anthracite, lignite, kaolin, bentonite, gypsum, etc..
Applications:
Metallurgy, construction, mining, chemical industry, etc.

Overview

Absorbing mature experiences from the last four-generation grinding mills, MB5X158 Pendulum Suspension Grinding Mill comes into market surprisingly with many advanced patented technologies. This new version grinding mill adopts multiple core technologies, like automatic thin-oil lubricating system in the main shaft, no cylinder structure for shovels and damping structure in the volute, etc. Thesecharacters greatly increase the grinding rollers’grinding effect and abrasion performance. MB5X158 Pendulous Suspension Grinding Mill is specific for processing non-metallic minerals.

Features

1.Automatic thin-oil lubricating system.
All the bearings are lubricated by the oil pump attached at the bottom of the main shaft, the lubricating system will start and off along with the mill.

2.Thin-oil lubrication system for grinding roller.
Compared with grease lubrication, oil bath lubrication can extend lubrication cycle and decrease the running costs. Touch-sensitive oil level detection technology can monitor oil level with the small observation hole without opening large access door.

3.No shovel cylinder structure.
The increased chamberspace willallow bigger roller diameter, thus increase the grinding pressure. Besides, larger vent area will reduce wind resistance.

4.Volute elastic damping structure.
MB5X158 Grinding Mill is different from other grinding plants which has rigidity connection by bolts between volute and bed. This new mill adopts damping structure with thickened rubber mat, which avoidsdamage by vibrationof volute and airframe and reduce vibration of classifier.

Working Principle

Through vibrating feeder, the raw materials are continuously and quantitatively transported from hopper to grinding chamber. Materials are grinded in the grinding chamber. The grinded powder will be blown up and be classified by cage-type classifier. The qualified powder goes through the cyclone collector for separation and collection, and then be discharged by pneumatic discharging valve as final powders. The air current is sucked into centrifugal blower from upper pipe of cyclone collector. It is a closed air flow system and circulates under negative pressure.

Specifications

Table 1 Specifications about main mill and classifier
Name Item Unit Specification
Main mill Quantity of roller Pc 4
Outside diameter of roller mm 500
Roller height mm 270
Ring diameter mm 1600
Model Y355M1-8
Power kw 132
Motor speed r/min 740
Classifier Model YVF2-200L-4
Power kw 30
Motor speed r/min 1480

Table 2Specifications about accessory equipment
Name Item Unit Specification
Blower Model YX3-315M-4
Power kw 132
Motor speed r/min 1480
Pulse Dust Filter Capacity m³/h 8500
Filtration area 91
Power kw 7.5
Vibrating Feeder Model GZ3F
Power kw 0.2
Copyright © 2004-2017 by China Liming Heavy Industry Science and Technology Co. LTD All rights reserved
Tel: 0086-371-86162511 [email protected]